Lipids / Stanbio Laboratory / The Source for Clinical Diagnostics

Product Overview

REAGENTS WITH LIPID CLEARING FACTOR (LCF)
In some cases, patient specimens with increased lipid concentrations appear turbid. This turbidity can cause problems in the performance of photometric assays and can be avoided by employing pre-treatment steps. Such steps, however, are time-consuming and prone to error. Stanbio has developed a mixture of special additives, collectively called LCF, to eliminate these pre-treatment steps. LCF is integrated in the respective assay reagent and begins working immediately in the incubation phase of the test procedure. Clearing is achieved within minutes (e.g. up to 2000 mg/dL triglycerides, equivalent to 22.8 mmol/L, is cleared within 2-3 minutes at room temperature). Stanbio LCF assays, therefore, do not require additional pre-treatment steps allowing for easily obtained correct results.

Ordering Information

Cholesterol LiquiColor^® Test (Enzymatic)

Modified Trinder Methodology
• Ready-to-use liquid reagent
• With Lipid Clearing Factor
• Use for Total and HDL Cholesterol assays
• Linear to 750 mg/dL
• Read @ 500 nm
• Standard included

Ref No.
1010-430

Contents
R: 4 x 30 mL
STD: 1 x 3 mL
(200 mg/dL)

1010-225

R: 2 x 250 mL
STD: 1 x 3 mL
(200 mg/dL)

1011-001

R: 1 x 1000 mL

Cholesterol, HDL Test,Precipitating Reagent

Mg/Dextran Sulfate Methodology
• Ready-to-use liquid reagent
• Stable @ 2–30°C
• Used with Enzymatic Cholesterol Test Set (Ref. No. 1010)
• Standard included

Ref No.
0599-020

Contents
R: 400 Test (1 x 20 mL)
STD: 1 x 3 mL
(50 mg/dL)

Cholesterol, HDL, Direct LiquiColor^® Test (Enzymatic)

Homogeneous Method for Direct HDL Measurement
• Ready-to-use liquid reagents
• No sample pretreatment
• Linear to 150 mg/dL
• Read @ 600 nm
• Calibrator available separately (Ref. No. 0595-003)

Ref No.
0590-040

Contents
R1: 1 x 30 mL
R2: 1 x 10 mL

0590-080

R1: 2 x 30 mL
R2: 2 x 10 mL

0590-500

R1: 3 x 125 mL
R2: 1 x 125 mL

Cholesterol, LDL, Direct LiquiColor^® Test (Enzymatic)

Homogeneous Method for Direct LDL Measurement
• Ready-to-use liquid reagents
• No sample pretreatment
• Linear to 520 mg/dL
• Read @ 600 nm
• Calibrator available separately
(Ref. No. 0595-003)

Ref No.
0710-080

Contents
R1: 2 x 30 mL
R2: 2 x 10 mL

Triglycerides LiquiColor^® Test (Mono)

Glycerylphosphate Oxidase (GPO)
Methodology
• Ready-to-use liquid reagent
• With Lipid Clearing Factor
• 5 minute incubation @ 37°C or 10 minutes @ 15–30°C
• Linear to 1000 mg/dL
• Read @ 500 nm
• Standard included

Ref No.
2200-430

Contents
R: 4 x 30 mL
STD: 1 x 2 mL
(200 mg/dL)

2200-225

R: 2 x 250 mL
STD: 1 x 2 mL
(200 mg/dL)

Triglycerides LiquiColor^® Test (Enzymatic)

Glycerylphosphate Oxidase (GPO)
Methodology
• Ready-to-use liquid reagents
• With Lipid Clearing Factor
• Working reagent stable up to 6 weeks @ 2-8°C
• 5 minute incubation @ 37°C or10 minutes @ 15–30°C
• Linear to 1000 mg/dL
• Read @ 500 nm
• Standard included

Ref No.
2100-430

Contents
R1: 4 x 30 mL
R2: 1 x 1.8 mL
STD: 1 x 2 mL
(200 mg/dL)

2100-225

R1: 2 x 250 mL
R2: 1 x 5.2 mL
STD: 1 x 2 mL
(200 mg/dL)

2100-001

R1: 1 x 1000 mL
R2: 1 x 10 mL